Learning Perl on Win32 Systems

Learning Perl on Win32 SystemsSearch this book
Previous: 17.3 Using a DBM HashChapter 17
Database Manipulation
Next: 17.5 Variable-Length ( Text) Databases
 

17.4 Fixed-Length Random-Access Databases

Another form of persistent data is the fixed-length, record-oriented disk file. In this scheme, the data consists of a number of records of identical length. The numbering of the records is either not important or determined by some indexing scheme.

For example, we might have a series of records in which the data has 40 characters of first name, a one-character middle initial, 40 characters of last name, and then a two-byte integer for the age. Each record is then 83 bytes long. If we were reading all of the data in the database, we'd read chunks of 83 bytes until we got to the end. If we wanted to go to the fifth record, we'd skip ahead four times 83 bytes (332 bytes) and read the fifth record directly.

Perl supports programs that use such a disk file. A few things are necessary in addition to what you already know:

The open function takes an additional plus sign before its I/O direction specification to indicate that the file is really being opened for both reading and writing. For example:

open(A,"+<b");  # open file b read/write (error if file absent)
open(C,"+>d");  # create file d, with read/write access
open(E,"+>>f"); # open or create file f with read/write access

Notice that all we've done was to prepend a plus sign to the I/O direction.

Next, we need to set the filehandle to binary mode using the binmode function:

binmode(A);  # set the filehandle to binary mode

Some operating systems don't need to use binmode, so you may find scripts that don't do this. Windows NT (and Windows 95) systems do need to use binmode, so if you find yourself getting strange results while using a random-access database file, this is the first place you should check.

After we've got the file open, we need to move around in it. You do this with the seek function, which takes the same three parameters as the C fseek library routine. The first parameter is a filehandle; the second parameter gives an offset, which is interpreted in conjunction with the third parameter. Usually, you'll want the third parameter to be zero so that the second parameter selects a new absolute position for the next read from or write to the file. For example, to go to the fifth record on the filehandle NAMES (as described above), you can do this:

seek(NAMES,4*83,0);

After the file pointer has been repositioned, the next input or output will start there. For output, use the print operator, but be sure that the data you are writing is the right length. To obtain the right length, we can call upon the pack() operator:

print NAMES pack("A40 A A40 s", $first, $middle, $last, $age);

That pack() specifier gives 40 characters for $first, a single character for $middle, 40 more characters for $last, and a short (two bytes) for the $age. This should be 83 bytes long, and will be written at the current file position.

Last, we need to fetch a particular record. Although the <NAMES> operator returns all of the data from the current position to the next newline, that's not correct; the data is supposed to go for 83 bytes, and there probably isn't a newline right there. Instead, we use the read function, which looks and works a lot like its C language counterpart:

$count = read(NAMES, $buf, 83);

The first parameter for read is the filehandle. The second parameter is a scalar variable that holds the data that will be read. The third parameter gives the number of bytes to read. The return value from read is the number of bytes actually read; typically, this number is the same number as the number of bytes asked for unless the filehandle is not opened or you are too close to the end of the file.

After you have the 83-character data, break the data into its component parts with the unpack operator:

($first, $middle, $last, $age) = unpack("A40 A A40 s", $buf);

Note that the pack and unpack format strings are the same. Most programs store this string in a variable early in the program, and even compute the length of the records using pack instead of sprinkling the constant 83 everywhere:

$names = "A40 A A40 s";
$names_length = length(pack($names)); # probably 83


Previous: 17.3 Using a DBM HashLearning Perl on Win32 SystemsNext: 17.5 Variable-Length ( Text) Databases
17.3 Using a DBM HashBook Index17.5 Variable-Length ( Text) Databases