Listing 3

#LOGIN=/etc/ppp/phonelogin
LOGIN=/bin/login
# line to use to do initialization. All
# INIT, OFF, and WAITFOR functions are
# handled on this line. If this line is
# not specified, any other program that
# wants to share the line (like kermit,
# uucp, seyon) will fail. This line will
# also be checked for lockfiles.
#
# format: <line> (without the /dev/) Map
# incoming line with outgoing line
# /dev/cub6 = /dev/ttyC6

INITLINE=cub6

# timeout to disconnect if idle...
TIMEOUT=60

# modem initialization string... Sets
# the modem to disable auto-answer
# This is for the CARDINAL modem.
# format: <expect> <send> ... (chat sequence)
INIT="" \d+++\dAT\r OK\r\n ATH0\r OK\r\n AT\s&F\s&C1\s&D2\sX1\sS0=0\r OK\r

# waitfor string... if this sequence of
# characters is received over the line,
# a call is detected.
WAITFOR=RING

# this line is the connect chat sequence.
# This chat sequence is performed after the
# WAITFOR string is found. The \A character
# automatically sets the baudrate to the
# characters that are found, so if you get
# the message CONNECT 2400, the baud rate
# is set to 2400 baud.
#
# format: <expect> <send> ... (chat sequence)
CONNECT="" ATA\r CONNECT\s\A

# this line sets the time to delay before
# sending the login banner
DELAY=1