Hack and /

In my last article, I introduced how MCollective could be used for general orchestration tasks. Configuration management like Puppet and Chef can help you bootstrap a server from scratch and push new versions of configuration files, but normally, configuration management scripts run at particular times in no particular order. Orchestration comes in when you need to perform some kind of task, specifically something like a software upgrade, in a certain order and stop the upgrade if there's some kind of problem. With orchestration software like MCollective, Ansible or even an SSH for loop, you can launch commands from a central location and have them run on specific sets of servers.

Although I favor MCollective because of its improved security model compared to the alternatives and its integration with Puppet, everything I discuss here should be something you can adapt to any decent orchestration tool.

So in this article, I expand on the previous one on MCollective and describe how you can use it to stage all of the commands you'd normally run by hand to deploy an internal software update to an application server.

I ended part one on MCollective with describing how you could use it to push an OpenSSL update to your environment and then restart nginx:

mco package openssl update
mco service nginx restart

In this example, I ran the commands against every server in my environment; however, you'd probably want to use some kind of MCollective filter to restart nginx on only part of your infrastructure at a time. In my case, I've created a custom Puppet fact called hagroup and divided my servers into three different groups labeled a, b and c, split along fault-tolerance lines. With that custom fact in place, I can restart nginx on only one group of servers at a time:

mco service nginx restart -W hagroup=c

This approach is very useful for deploying OpenSSL updates, but hopefully those occur only a few times a year if you are lucky. What you more likely will run into as a common task ideal for orchestration is deploying your own in-house software to application servers. Although everyone does this in a slightly different way, the following pattern is pretty common. This pattern is based on the assumption that you have a redundant, fault-tolerant application and can take any individual server offline for software updates. This means you use some kind of load balancer that checks the health of your application servers and moves unhealthy servers out of rotation. In this kind of environment, a simple, serial approach to updates might look something like this:

If any of those steps fails, the administrator would stop the update and go investigate and fix the problem. Often if there is going to be a failure, it will be at the software-update or health-check phase, and the point of this process is to make sure that if an upgrade doesn't go well, you stop at the first server before pushing broken software to the rest of the environment.

Traditionally, administrators might perform all of the above steps manually by logging in to different servers and interacting with different web interfaces perhaps. The next step they follow generally involves wrapping a series of SSH commands that would perform these actions into a shell script and then maintain some local configuration file that defines lists of servers.

With MCollective, the process is similar with the main difference being that MCollective doesn't need to have SSH root privileges on these machines. Instead, MCollective performs its tasks by putting a limited set of commands in a job queue that all of the servers check. The commands are restricted by what MCollective plugins you have installed on a particular server, and MCollective does a good job of sanitizing input from the plugins it includes by default.

Most of the above commands in that deploy list can be completed using the default plugins MCollective includes. I use Nagios for monitoring, and although MCollective does include a plugin that lets you perform NRPE commands (a Nagios agent that runs on each server that allows Nagios to run local commands to check disk space, RAM and so on), it doesn't include anything that could directly set a maintenance mode in Nagios.

Another missing piece in the above list of commands is the ability to interact with a load balancer. Many people might skip this step these days, as they are using something like nginx's internal load-balancing abilities and may not have an easy way to set something like a maintenance mode to drain existing connections to a host. In that case, you may just skip ahead to stopping the service and let the health check detect the failure. That approach risks dropping existing connections though, and because I use Haproxy as my load balancer, I can use its built-in command mode to set a maintenance mode on specific servers if I'm logged in to the load balancer.

Fortunately, MCollective has the ability to extend its existing set of commands with your own custom plugins to perform specific tasks. Unfortunately, writing, packaging and deploying even trivial MCollective plugins can be a bit complicated the first time you do it, and it's involved enough that it would require an article all of its own. MCollective's plugin documentation is a good place to start, and in particular, the documentation on writing plugins that use MCollective's RPC framework makes the code you have to write much more straightforward, even if you aren't familiar with Ruby.

When you write a custom MCollective plugin, you choose a new plugin name (say, haproxy) and then define a list of commands you want to pass that new plugin (such as disable_server and enable_server). If a command needs some kind of argument passed to it, you also define those. Then, you map those commands and arguments into basic command-line commands using their RPC framework, or you can dig in to using native Ruby libraries if you are familiar with that.

I wrote a custom Nagios plugin and an Haproxy plugin that would send my custom commands to their command file and command socket, respectively. So to set a maintenance mode on server1.example.com for Nagios and Haproxy, I would type these commands:

mco rpc nagios maintenance server=server1.example.com duration=5m
mco rpc haproxy disable_server server="serverrole/server1"

Because I took advantage of MCollective's RPC framework, I have to type rpc in front of my custom commands.

Next I provide the name of my plugin, then the command I want to run, followed by any custom arguments. Then on the Nagios server side, I intercept that command and format it into a format I can write to Nagios' local command file so it can execute. In the case of the Haproxy plugin, this command goes out to any server that happens to be running Haproxy. If a particular Haproxy server doesn't have my server defined in its configuration, it doesn't do anything harmful, and otherwise, it sets it to maintenance mode.

With these plugins in place, you can replace the above generic list of steps to specific MCollective commands:

I've ended up wrapping all of these commands inside a basic shell script that takes the name of a particular application as an argument, then performs the first mco find command to get the list of servers that have that package installed. Then at that point, I just run the next set of commands in a basic for loop. Where appropriate, I added a sleep command here and there to give a service time to come up. If any of the commands fail, the script exits out and reports the error so the administrator can investigate. Otherwise, it runs through each server in order.

Of course, later versions of this script have become a bit more sophisticated, so it can accept some custom arguments, log the output to a known log file and be more efficient in how it sleeps between commands. But the end result for the sysadmin is a simple “deployapp” script they can run that properly updates the application the right way, every time, with no risk of skipping or forgetting a server or steps in the process.