4.12. Altering the Button's Style

By default, a Button looks like it's raised slightly off the surface of the window. By using the -relief option, you can change the style of the Button edges:

Each value changes the look of the Button slightly, as you can see in Figure 4-20. Here is a list of the styles:

flat

No edges are drawn around the Button at all. Makes it look like only text is present in the window.

groove

Gives a slightly depressed look to the edge (as if there were a ditch around the text).

raised

Gives a 3D look with a shadow on the lower and right sides of the Button, which causes it to look higher than the window surface. This is the default.

ridge

Makes it look like a ridge is around the text. The opposite of 'groove'.

solid

Draws a solid line around the widget.

sunken

Gives the 3D effect of being below the surface of the window. The opposite of 'raised'.

No matter which value is specified for the -relief option, when the Button is pressed with the mouse, its relief will change to 'sunken'.

Figure 4-20. Different relief types for a Button

The Checkbutton and Radiobutton start with flat relief. Figure 4-21 and Figure 4-22 show these.

Figure 4-21. Different relief types for a Checkbutton

Figure 4-22. Different relief types for a Radiobutton

In addition to changing the type of edge drawn around a Button, you can change the thickness of the edge by using -borderwidth:

The default -borderwidth for a Button is 2 and for a Checkbutton and a Radiobutton is 0. The wider the -borderwidth, the more dramatic the effects of the -relief option become. Figure 4-23 shows what a -borderwidth of 10 does to each relief type for a Button. When changing the -borderwidth on a Checkbutton or Radiobutton, be careful you don't use too large a value, because the indicators do funny things at larger values. Take a look at Figures Figure 4-24 through Figure 4-27 for clarification. Hopefully seeing how silly these look here, you won't waste time wondering why your own indicators don't work.

Figure 4-23. Different relief types for a Button with -borderwidth set to 10

Figure 4-24. Checkbuttons with -borderwidth => 4

Figure 4-25. Checkbuttons with -borderwidth => 10

Figure 4-26. Radiobuttons with -borderwidth => 4

Figure 4-27. Radiobuttons with -borderwidth => 10

Note that using -borderwidth with values greater than 4 makes widgets look extremely odd. In each of the widget chapters, you'll find a screenshot showing what happens to the widget with a larger -borderwidth value for each of the possible -relief values. The best use of -borderwidth is making one widget stand out more than the others temporarily during development. (You can also use this trick with Frames to figure out where the Frame is. Normally they are invisible. See Chapter 11, " Frame, MainWindow,and Toplevel Widgets" for more on this.)

---

4.11. Text Manipulation		4.13. Changing the Size of a Button

---

Copyright © 2002 O'Reilly & Associates. All rights reserved.