Book HomePerl & LWPSearch this book

1.3. Installing LWP

LWP and the associated modules are available in various distributions free from the Comprehensive Perl Archive Network (CPAN). The main distributions are listed at the start of Appendix A, "LWP Modules", although the details of which modules are in which distributions change occasionally.

If you're using ActivePerl for Windows or MacPerl for Mac OS 9, you already have LWP. If you're on Unix and you don't already have LWP installed, you'll need to install it from CPAN using instructions given in the next section.

To test whether you already have LWP installed:

% perl -MLWP -le "print(LWP->VERSION)"

(The second character in -le is a lowercase L, not a digit one.)

If you see:

Can't locate LWP in @INC (@INC contains: ...lots of paths...).
BEGIN failed--compilation aborted.

or if you see a version number lower than 5.64, you need to install LWP on your system.

There are two ways to install modules: using the CPAN shell or the old-fashioned manual way.

1.3.1. Installing LWP from the CPAN Shell

The CPAN shell is a command-line environment for automatically downloading, building, and installing modules from CPAN.

1.3.1.1. Configuring

If you have never used the CPAN shell, you will need to configure it before you can use it. It will prompt you for some information before building its configuration file.

Invoke the CPAN shell by entering the following command at a system shell prompt:

% perl -MCPAN -eshell

If you've never run it before, you'll see this:

We have to reconfigure CPAN.pm due to following uninitialized parameters:

followed by a number of questions. For each question, the default answer is typically fine, but you may answer otherwise if you know that the default setting is wrong or not optimal. Once you've answered all the questions, a configuration file is created and you can start working with the CPAN shell.

1.3.1.2. Obtaining help

If you need help at any time, you can read the CPAN shell's manual page by typing perldoc CPAN or by starting up the CPAN shell (with perl -MCPAN -eshell at a system shell prompt) and entering h at the cpan> prompt:

cpan> h
 
Display Information
 command  argument          description
 a,b,d,m  WORD or /REGEXP/  about authors, bundles, distributions, modules
 i        WORD or /REGEXP/  about anything of above
 r        NONE              reinstall recommendations
 ls       AUTHOR            about files in the author's directory
 
Download, Test, Make, Install...
 get                        download
 make                       make (implies get)
 test      MODULES,         make test (implies make)
 install   DISTS, BUNDLES   make install (implies test)
 clean                      make clean
 look                       open subshell in these dists' directories
 readme                     display these dists' README files
 
Other
 h,?           display this menu       ! perl-code   eval a perl command
 o conf [opt]  set and query options   q             quit the cpan shell
 reload cpan   load CPAN.pm again      reload index  load newer indices
 autobundle    Snapshot                force cmd     unconditionally do cmd

1.3.1.3. Installing LWP

All you have to do is enter:

cpan> install Bundle::LWP

The CPAN shell will show messages explaining what it's up to. You may need to answer questions to configure the various modules (e.g., libnet asks for mail hosts and so on for testing purposes).

After much activity, you should then have a fresh copy of LWP on your system, with far less work than installing it manually one distribution at a time. At the time of this writing, install Bundle::LWP installs not just the libwww-perl distribution, but also URI and HTML-Parser. It does not install the HTML-Tree distribution that we'll use in Chapter 9, "HTML Processing with Trees" and Chapter 10, "Modifying HTML with Trees". To do that, enter:

cpan> install HTML::Tree

These commands do not install the HTML-Format distribution, which was also once part of the LWP distribution. I do not discuss HTML-Format in this book, but if you want to install it so that you have a complete LWP installation, enter this command:

cpan> install HTML::Format

Remember, LWP may be just about the most popular distribution in CPAN, but that's not all there is! Look around the web-related parts of CPAN (I prefer the interface at http://search.cpan.org, but you can also try http://kobesearch.cpan.org) as there are dozens of modules, from WWW::Automate to SOAP::Lite, that can simplify your web-related tasks.

1.3.2. Installing LWP Manually

The normal Perl module installation procedure is summed up in the document perlmodinstall. You can read this by running perldoc perlmodinstall at a shell prompt or online at http://theoryx5.uwinnipeg.ca/CPAN/perl/pod/perlmodinstall.html.

CPAN is a network of a large collection of Perl software and documentation. See the CPAN FAQ at http://www.cpan.org/misc/cpan-faq.html for more information about CPAN and modules.

1.3.2.1. Download distributions

First, download the module distributions. LWP requires several other modules to operate successfully. You'll need to install the distributions given in Table 1-1, in the order in which they are listed.

Table 1-1. Modules used in this book

Distribution

CPAN directory

MIME-Base64

authors/id/G/GA/GAAS

libnet

authors/id/G/GB/GBAAR

HTML-Tagset

authors/id/S/SBURKE

HTML-Parser

authors/id/G/GA/GAAS

URI

authors/id/G/GA/GAAS/URI

Compress-Zlib

authors/id/P/PM/PMQS/Compress-Zlib

Digest-MD5

authors/id/G/GA/GAAS/Digest-MD5

libwww-perl

authors/id/G/GA/GAAS/libwww-perl

HTML-Tree

authors/id/S/SB/SBURKE/HTML-Tree

Fetch these modules from one of the FTP or web sites that form CPAN, listed at http://www.cpan.org/SITES.html and http://mirror.cpan.org. Sometimes CPAN has several versions of a module in the authors directory. Be sure to check the version number and get the latest.

For example to install MIME-Base64, you might first fetch http://www.cpan.org/authors/id/G/GA/GAAS/ to see which versions are there, then fetch http://www.cpan.org/authors/id/G/GA/GAAS/MIME-Base64-2.12.tar.gz and install that.

1.3.2.2. Unpack and configure

The distributions are gzipped tar archives of source code. Extracting a distribution creates a directory, and in that directory is a Makefile.PL Perl program that builds a Makefile for you.

% tar xzf MIME-Base64-2.12.tar.gz
% cd MIME-Base64-2.12
% perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for MIME::Base64

1.3.2.3. Make, test, and install

Compile the code with the make command:

% make
cp Base64.pm blib/lib/MIME/Base64.pm
cp QuotedPrint.pm blib/lib/MIME/QuotedPrint.pm
/usr/bin/perl -I/opt/perl5/5.6.1/i386-freebsd -I/opt/perl5/5.6.1
/opt/perl5/5.6.1/ExtUtils/xsubpp  -typemap
/opt/perl5/5.6.1/ExtUtils/typemap Base64.xs > Base64.xsc && mv
  Base64.xsc Base64.c
cc -c  -fno-strict-aliasing -I/usr/local/include -O    -DVERSION=\"2.12\"
  -DXS_VERSION=\"2.12\" -DPIC -fpic -I/opt/perl5/5.6.1/i386-freebsd/CORE
Base64.c
Running Mkbootstrap for MIME::Base64 ( )
chmod 644 Base64.bs
rm -f blib/arch/auto/MIME/Base64/Base64.so
LD_RUN_PATH="" cc -o blib/arch/auto/MIME/Base64/Base64.so  -shared
  -L/opt Base64.o
chmod 755 blib/arch/auto/MIME/Base64/Base64.so
cp Base64.bs blib/arch/auto/MIME/Base64/Base64.bs
chmod 644 blib/arch/auto/MIME/Base64/Base64.bs
Manifying blib/man3/MIME::Base64.3
Manifying blib/man3/MIME::QuotedPrint.3

Then make sure everything works on your system with make test:

% make test
PERL_DL_NONLAZY=1 /usr/bin/perl -Iblib/arch -Iblib/lib 
-I/opt/perl5/5.6.1/i386-freebsd -I/opt/perl5/5.6.1 -e 'use Test::Harness
  qw(&runtests $verbose); $verbose=0; runtests @ARGV;' t/*.t
t/base64..........ok
t/quoted-print....ok
t/unicode.........skipped test on this platform
All tests successful, 1 test skipped.
Files=3, Tests=306,  1 wallclock secs ( 0.52 cusr +  0.06 csys =  0.58 CPU)

If it passes the tests, install it with make install (as the superuser):

# make install
Installing /opt/perl5/site_perl/5.6.1/i386-freebsd/auto/MIME/Base64/Base64.so
Installing /opt/perl5/site_perl/5.6.1/i386-freebsd/auto/MIME/Base64/Base64.bs
Files found in blib/arch: installing files in blib/lib into architecture
  dependent library tree
Installing /opt/perl5/site_perl/5.6.1/i386-freebsd/MIME/Base64.pm
Installing /opt/perl5/site_perl/5.6.1/i386-freebsd/MIME/QuotedPrint.pm
Installing /usr/local/man/man3/MIME::Base64.3
Installing /usr/local/man/man3/MIME::QuotedPrint.3
Writing /opt/perl5/site_perl/5.6.1/i386-freebsd/auto/MIME/Base64/.packlist
Appending installation info to /opt/perl5/5.6.1/i386-freebsd/perllocal.pod


Library Navigation Links

Copyright © 2002 O'Reilly & Associates. All rights reserved.